all Drivetrains for 350z & g35
please call for other makes and models to get similar savings!

Driveshaft
Only
$719

L2 Axles (350Z & G35): Since there are a limited number of axle upgrades for the 350z and G35, the Driveshaft Shop has released a system that has a proprietary chrome moly outer c.v. that’s a direct fit into the factory hub. They also made a center bar from 300M that is not only stronger but has more torsional strength. After testing the factory units we fount both the outer c.v. and the bar to be very brittle and not very resilient.

Installation: $225

Driveshaft
Only
$1450

L5 Axles (350Z & G35): Same as L2 axles with some major improvements that include: Heavy duty custom billet outer CV made from 300m. Removable spline also made from 300m. Heavy duty cages and all internals made from chromoly.

Installation: $225

JWT Clutch
Only
$399

350Z / G35 HIGH CLAMPING FORCE CLUTCH SET. 1200KG clamping force and a smooth organic disc makes this the best choice for street / track 350Z-G35 including boosted cars!

RPS Clutch
Only
$590

RPS Full Face Organic w/ sprung hub (VQ35): MAX pressure plates offer 400-600 lbs of extra clamping force to hold your biggest power. Pedal feel is stiff to very stiff and engages smooth. RPS is the only clutch company with a U.S. Patent (#5,769,973) on their single diaphragm pressure plate technology.

Installation: $375

RPS Clutches
Only
$560

6 paddle Ceramic w/ sprung hub (VQ35): MAX pressure plates offer 400 to 600 pounds of extra clamping force to hold your biggest power. Pedal feel is stiff to very stiff and engages quick and smooth. RPS is the only clutch company with a U.S. Patent (#5,769,973) on their single diaphragm pressure plate technology.

Installation: $375

Nismo Light-weight Flywheel: VQ35
Only
$505

- 28% lighter than stock
- Less rotating mass improves throttle response for better acceleration
- Compatible with OE clutch cover
- -(part number - 12310-RSZ30-US)

installation $375

JWT Lightweight Flywheel
Only
$375

JWT 350Z / G35 low inertia flywheel weighs in at 14lbs. cutting the weight of the stock dual mass unit in half makes this engine respond to its true potential.

CYN-R-G Flywheel
Only
$485

This flywheel is designed to be used with RPS'S race proven 300ZX Sport and MAX Series clutches. The last flywheel you will ever have to buy. The patented segmented heat shield design will not warp like other common one piece heat shields.

installation $375

Cusco Type RS
Only
$1000

The Cusco Type RS LSD is a 1.5 way (upgradeable to 2 way) limited slip differential is designed to provide maximum traction that is most often lost in hard off-the-line acceleration. The unit will sense when one wheel starts losing traction due to track/road conditions, hard cornering, and/or torque steer. Once it detects the slippage, it will compensate by shuffling the power from side to side to overcome the loss of traction.



Call for installation!

NISMO GT 1.5 LSD
Only
$1050

The Nismo GT LSD is a 1.5 way (upgradeable to 2 way) limited slip differential designed to provide maximum traction that is most often lost in hard off-the-line acceleration. The unit will sense when one wheel starts losing traction due to track/road conditions, hard cornering, and/or torque steer. Once it detects the slippage, it will compensate by shuffling the power from side to side to overcome the loss of traction.

Call for installation!

Nismo Finned aluminum differential cover: 350z
Only
$99

- NISMO Differential cooler with large Heat Soak
- Reduces differential temperature for longer life
- For install, the whole differential pumpkin must be taken down
- -(part number - 38351-350DK)

Call for installation!

Cusco Type MZ
Only
$860

The Cusco Type MZ 2way LSD has everything that the RS offers and more! The clutch plates have been increased from eight to ten plates on each side improving the performance even more.